Disneyland Tribute for My Mom (Fantasyland game)

Disneyland is celebrating its 55th anniversary.  I’m commemorating it with an artistamp design featuring art by my mother, Muriel Joan Bernier (1919 – 2010).

The artwork at left, which was also on the Fantasyland board game, was based on my mother’s art.

She freelanced for Disney in the 1950s. I remember her drawing lots & lots of versions of the castle, for Walt Disney and Parker Brothers (the game manufacturer) to approve.  Some versions were tall & skinny. Others were very broad and sturdy, like castles in England and Wales.

My mother’s drawing style was distinctive. I’d recognize it anywhere. She’d start with very simple shapes — ovals, cylinders, squares, and circles — and then adjust the lines.

She did a lot with shading, to get the effects she wanted. She liked contrast in her work. (That wasn’t always possible when she freelanced for Rust Craft, creating greeting cards & wrapping paper designs.)

The next photo shows the final version of the game artwork. (Yes, Bugs Bunny was among the characters entering the castle. I’m not sure if Mum did that deliberately, or if it was a whim of hers, just for fun.)

Disney Fantasyland board game 1956 Muriel
Fantasyland board game (1956), artwork by Muriel Bernier

My mother passed away earlier this year, and — I’m not sure why — she didn’t want me to post her artwork online.  (My mother’s always been eccentric.  Once she decides something, she rarely changes her mind.  Questioning her was pointless.)

This, however, gets around that.  The images were already online… just not credited to her.

So, I created the artistamp at the top of this article, as a tribute.  Ordinarily, I add my artistamp postal name — Ballynafae — and a postage amount (usually 3p) to make my artistamps look more stamp-like.  In this case, it didn’t seem right, so I added the basic text and here it is, as-is.

You can download it as a stamp-sized image (PDF), either with a stamp-like edge (as a graphic), or as shown above.

Artistamps – Digital swaps! (2010)

artistamp swap sampleIt’s 2010. It’s time for an artistamp swap.

Swaps are such fun!

Update: In 2010, I attempted some digital artistamp swaps at AJ (ArtistsJournals community at Yahoo Groups).  It wasn’t a huge success.  I’m not sure that people understand what artistamps actually are.

Artistamps are faux postage… totally made-up, fake postage, often from your own imaginary country. (One of mine is “Ballynafae,” a Celtic land of the whimsical faerie folk. I’ve been sending artistamps off & on since the 1970s.)

Artistamps aren’t designed to fool postal authorities. They’re a form of art, usually placed on the front of an envelope or on a post card.

(Different countries have different rules about where artistamps can be placed. Last time I checked, you can put artistamps next to your regular postage on mail sent in the U.S., but it has to be clearly separated from regular postage on British cards & letters.)

Within postage, artistamps are considered “Cinderellas” — faux postage. Artistamps are also a sub-group of mailart, which is art sent by mail, usually where it can be clearly seen by the postal carrier.

You can learn more about artistamps at:


Here were the 2010 digital artistamp swaps, and their dates:

17 July – Stamps to celebrate the 1955 opening of Disneyland. Any artistamp with a Disney theme is fine. (Please, no raunchy parodies.) Though we generally don’t use copyrighted images in our art, this will be an exception, and only for private/fan use.  (Here’s mine – A Disneyland Tribute to My Mom)

15 August – Best Friends Day! Celebrate this day with an artistamp swap  about friendship, your best friend, or a group of friends.

19 September – Pirate-themed artistamps! Celebrate “Talk Like a Pirate Day” with an artistamp related to pirates, pirate treasure, maps of exotic lands, etc.  Join the fun and parrrticipate in this arrrtistamp swap!

20 October – Halloween theme! I’m setting this artistamp swap deadline ahead of the celebration, so people will have time to download the stamps and use them for their Halloween cards… if you’re sending any. (I plan to.)

Also, if you’re interested in swapping actual artistamped mail, that month, include your name and postal mailing address in a text file in that month’s folder.

So, start thinking about artistamp designs. If you don’t have a graphics program to create artistamps, there are several free programs online. You can find some links and reviews at About.com:

What’s your favorite free graphics software?

* Linux users are often very enthusiastic about GIMP http://www.gimp.org (Also available for Windows & Mac) and Inkscape http://www.inkscape.org/ (ditto)
* Windows users often like Paint.net http://www.getpaint.net/
* Mac user…? Please share your favorites, too!

Questions? Better links? Suggestions? Share your thoughts!  (And I hope you’ll join this artistamp swap, too.)

Resizing Your Art for Artistamps

3sun-ibQ: I want to make some artistamps by hand, not necessarily on the computer. How do I make my art the right size for stamps? Should I be creating the art in stamp size, to start with?

A: Most commercial artists work much larger than the finished, printed product will be. For example, a standard paperback book cover was often a poster-size painting.

When the image is reduced to the correct size, there will be impressive detail in it without a lot of microscopic work in the first place.

When you’re creating stamps, or any reduced-size art, there are several ways to work:

    Work to size

    Obviously, you can create the work in the size it should be when completed. This is fine for carved stamps, one-of-a-kind work, and so on. However, if you’re working off the computer, or want a lot of detail, this is the difficult way to do things.

    Work larger, then reduce at the photocopy machine

    Create the images you want, in a larger size. Try to work in a size that can at least fit on the glass of the copy machine.

    If your art fills a standard letter-size sheet of paper, and your finished stamp will be less than one inch square, you’re probably including more detail than you need to.

    Next, use the photocopier’s reducing option, until the image is the size that you want. That is, if you’re working h-u-g-e, reduce the image to the smallest size the machine permits, then reduce that copy to the size you need.

    If you’re using a color copier, this can get expensive as you use trial-and-error to achieve the correct size. Experiment with a regular (cheaper) photocopier first. Make note of the percentages you used to reduce to the ideal size.

    Once you’ve figured out what percentage of reduction looks best, switch to the color copier, enter the correct reduction percentage, and print your final work.

    Work larger, and reduce with your computer graphics program

    If you’re using your own color printer, this is one of the best choices.

    Basically, scan your work with your computer scanner, then use your graphics program to reduce the image to the finished size. Repeat the image for a full sheet.

    (Some programs call this “tiling,” others–including Adobe–use words such as “pattern.” You can learn how to do this at my article, How to make a sheet of stamps, with Adobe Photoshop.)

    Finally, print it on your printer.

    If you don’t have your own color printer, many larger copy shops (for example, some FedEx/Kinko’s shops) have computers and color printers for customers to use, for a small fee. Bring them a disk of your completed work, and print it on their printer.

    Work larger in b&w, adding color to the correct-size image

    You can avoid the color issue altogether by designing black and white artistamps. However, if you want colored artistamps and the previous methods won’t work for you, there are alternatives.

    Create the black-and-white line work in a larger format.

    Then, reduce it with a b&w photocopier, and tile with repeated copies, as necessary.

    Hand-color the image/s.

    Finally, either use those as stamps, or visit a copy shop with a color copier, and make multiple photocopies for use as stamps.

No doubt there are other ways to accomplish your goal, but these are among the most popular.

There is no point in using a magnifying glass and a three-haired paintbrush to create eensy-weensy images for the stamps. Work big and bold, and then reduce the images for the best results.

When I work larger for any purpose, I always work at least 33% bigger than the final image, for the best impression of detail in the finished product.

How to make a Sheet of Artistamps with Adobe PhotoShop

If you’re new to Adobe’s PhotoShop program, it can be overwhelming to figure out all the fabulous bells & whistles it offers. However, it’s a wonderful tool for artistamps!

When I wrote this article around 2002, I was using Adobe 5.0. The commands may vary slightly if you’re using a different version, but the concepts remain the same.

If you have an image that you’ve created with (or scanned into) Adobe, here are the steps to repeat it easily, so the image fills a page of artistamps when you print it:

1. Select the image you want to use. This means it should be surrounded by dotted lines indicating that the Adobe program has “selected” it. If you don’t know how to do this, go into Adobe’s Help menu and look up “selecting an area.”

2. Go into the Edit menu, select Define and then Define Pattern. (Some programs go directly to Define Pattern.) Your image is now saved in Adobe’s short-term memory.

3. Delete your original image, by clicking on the X on the image window, or you can just delete the layer with the image by using Layer–>Delete Layer.

4. Either enlarge that emply window/layer (if you merely deleted the layer) so the Image Size is slightly smaller than the paper you’ll be printing on –OR– (if you clicked on the X and removed the entire image) create a new image (File–>New) in that size.

I like to work with an image that’s about 7″ x 10″ for paper that’s 8.5″ x 11″.

5. Select the entire image/layer. You can do this by hitting Control-A, or by right clicking and choosing Select All.

6. Right click inside the new image/layer, select Fill and then choose Pattern. Your image, repeated to fill the new size, will appear. If you are happy with what you see, you’re ready to print.

7. If your new, repeated image isn’t tidy–and it usually isn’t–you’ll want to remove (crop) the partial images. Use your Select Area tool to surround all of the complete images. Then choose Image and Crop so the loose pieces vanish. Now you’re ready to print.

8. If you’re using nice (price-y) paper for your finished product, it’s a good idea to print a “proof” copy on plain (cheap) paper, to make certain the finished plate of stamps looks pleasing.

If positioning is key, you may want to print on tracing vellum first, lay it over the paper you’ll be using for the finished product, and see if it lines up okay.

9. After you’ve printed your stamps and are ready to close your Adobe program, save just ONE copy of the stamp image, using the Crop feature. You can save the entire repeated image if you like, but that can take up a lot of disk space if your hard drive is nearly full.

Cheatsheet version:

1. Select image area
2. Edit–>Define–>Pattern
3. Delete original image
4. Create new image in size to fit on printer paper
5. Right click to Select All
6. Right click inside area, choose Fill–>Pattern


Perforations for Artistamps

I wrote the first version of this article around 2002. New perforating options are constantly being developed, tested and marketed.

So, this article is dated, and remains at this site as a starting point for people who want to explore perforating options for artistamps.

One of the first questions people have, is how to make perforated edges so artistamps look like “real” postage.

Many of us simply use the purple-handled Fiskars scissors that create small, wavy edges similar to perforated stamps. You’ll find them around the scrapbooking or rubber stamp aisles of most large crafts shops such as Michael’s.

Others put black or grey dots, similar to the appearance of perforations, on the stamps themselves. Then they cut right next to the dots, with a normal papercutter or scissors.

And some don’t fret about this aspect of the process, and simply leave the stamps straight-edged, or unperforated.

Home-grown perforation options

Another solution to the perforation problem is to create your own holes.

So far, the results with wheels intended for other purposes has been disappointing. The best reviews are from people who use a dressmakers’ marking wheel (on a soft surface so the wheel actually perforates the paper).

Another suggestion is to use a sewing machine without thread in the needle, to punch the holes. These won’t exactly fool anyone into thinking they’re real perforations, but they’re a pretty good substitute.

Use the largest possible needle, intended for sewing through leather or denim. Use masking tape to mark the arm of your sewing machine as a guide, for each line of perforations, so you’ll know how to keep the paper straight as you feed it under the needle.

And, be sure to clean the machine often. Shards of paper and excess dust can build up quickly around the bobbin housing.

However, the only real perforations–so far–are made by a perforating machine.

Professional perforation

WCP-NM (Olathe Poste) sells a variety of perforated papers.

100 Proof Press has artistamp kits and perforated papers.

The Olathe Poste offers an affordable perforating service with a very quick turnaround time.

Home perforating machines

Late in 2005, Dr. Arcane (on the AML [Artistamp] list at Yahoo Groups), created a relatively affordable home perforation machine for artistamp creators. However, his early production run was very limited. Check that list for updates, if you’re interested.

(Search the list archives using the name of the machine, Whizbang, to learn more about it at AML.)

My ex-husband tried to make a similar machine a few years ago, but a major problem couldn’t be resolved: The paper moved too much. The two-handled approach of the Whizbang looks like a fine solution.

Professional and antique perforating machines

Ideally, you’ll find someone who owns one of those wonderful antique perforators. These are massive, heavy beasts that will punch teensy, professional-looking holes in sheets of your stamps.

Frankly, the only way to buy one–except through sheer luck at eBay or a local auction–is to network with printers and other artistampers, so you hear about the infrequent but available perforator when someone is willing to part with one.

Remember that most modern perforating machines are designed to cut dashed lines for tear-out coupons, and so on. They don’t make rows of round holes as on postage stamps.

The next best thing to having your own perforating machine, is to know someone else who owns one, who will swap perforating services for free artistamps, or some other reasonable barter.


Real, Exotic and Foreign-looking Stamps

These are a few stamps from my own collection of inexpensive, international postage stamps. They are “real” stamps, used on mail.

I like them because they look exotic and/or old, and I gather ideas from them.

I’m providing them as inspiration. You can copy* them, tweak them with your own color and design ideas, or… well, you decide!

Want to see more cool and unusual stamps?

I recommend The Mystery Box, a philatelists’ site.


*No stamps at this site — “real” or artistamps — should be copied or used illegally.

Glues and Adhesives for Artistamps

Adhesive backing for artistamps

dw1-webIf you’re sending your artistamps for others to use, you probably want to make them as much like “real” postage as possible.

For example, you’ll want the recipient to be able to lick the back of the stamp so the glue becomes moist and will hold the stamp in place.

The following information was provided by members of the AML artistamp list.

These are your three most popular options for glues and adhesives, if you’re creating artistamps.

(1) Buy paper with an adhesive (water reactivated) backing.

You can get dry, gummed paper label paper from a chain store called Paper Plus. (I think this is a division of Unisource, but their demo catalogue doesn’t list any perforated papers.)

One brand in the late 1990s was Nashua Davac, Dry Gummed Label Paper, #7649, 50# offset, and it comes in 8.5″ x 11″ size, and others. (Manufactured by Nashua Label.)

Another resource might be a small quantity supplier of paper. Some of them are “green” paper companies. You can get more information at Conservatree.com.

If this sounds too complicated, you can have someone professionally print your artistamps on pre-gummed perforated paper.

I recommend Anna Banana’s Banana Productions. As you would expect, her work is very professional.  (The link to her site is broken.  If you know the best link for her products, let me know.)

WCP-NM (Olathe Poste) is another excellent online resource.


(2) Apply lickable (water reactivated) glue.

The glue stuff itself can be purchased and applied to any paper.

One kind of glue stuff is Neutral pH Adhesive, by Lineco. You’re looking for it as product number 901-1008. It’s carried by larger camera supply shops, as photographers use this to mount photos, etc.

You can also find this Neutral pH Adhesive by Lineco, at MisterArt.

Another glue stuff–that I use–is Lick & Stick. It comes in a bottle that looks like a roll-on deodorant, but it has a sponge on the top of it. I sort of paint it on the paper, and it dries. Most curling that occurs when it’s wet, flattens out as the glue dries. The glue is clear and tasteless.

You can order Lick & Stick at directly from the manufacturer, Greensneakers. They offer templates for other paper products, too.


(3) Make your own water reactivated glue.

See my article, Glue Recipes – Artistamps for a variety of homemade glues that you can mix and apply to your stamps.

Glue Recipes – Artistamps

schoolglueGlue recipes vary from great to disastrous. But, they can be a fine alternative to “lickable” adhesive-backed paper and commercially prepared glues, described in my article, Glues and adhesives for artistamps.

Climate differences can affect how well a glue recipe works. Likewise, personal taste–sometimes literally–can influence your choices.

Artistamp genius Jas kindly sent this recipe for stamp glue, as developed by Bugpost.


1/4 oz. unflavored gelatin
1 T cold water
3 T boiling water
1/2 t white corn syrup
1/2 t lemon extract

1. In small bowl sprinkle gelatin into cold water, put aside until softened
2. Pour softened gelatin into boiling water & stir until completely disolved
3. Add corn syrup & lemon extract, mix well.

1. Brush thinly on to back of stamp sheet
2. Let dry.

1. Double boiler is handy
2. Gum tends to react more slowly when licked than conventional gums
3. Mixture can be stored in an airtight container in the refrigerator, for a very small amount of time. You may need to reheat it if it’s too gummy and thick.

avegifNote: The lemon extract repels bugs which like to munch on starches (such as gelatin and corn syrup), but you could probably use other flavoring extracts from the baking supplies aisle of the grocery store. Artistamp collectors in tropical countries may choose to store stamps in plastic.

Also, before using another flavor, remember that many people have life-threatening allergies and react badly to anything with peanuts in them.  Since this may include almond flavoring, and perhaps others, humor your tastebuds carefully!

More recipes!

Here’s one contributed by

Arlene Shipley:

6 Tbs. white vinegar
4 packets (1oz.) unflavored gelatin
1 Tbs. mint extract. (or whatever flavor you want)

Boil vinegar in small pan. Add gelatin and stir until dissolved. Add flavoring and remove from heat. Use brush to spread on envelope flaps. Let dry. Moisten to seal. When leftover glue cools, it will set. It may be reused again and again if you take a little caution when storing it. Place it in a small HEAT PROOF container and you can shoot it with your heat gun to remelt it. Or you can place the small glass jar into a pan of water and heat it that way. Just take caution not to break your glass containers when reheating the glue.

Another one, from Linda Mulligan, described as a Girl Scout recipe:

One part white glue
one part white vinegar (you may have to play with the proportions)

Coat let dry and coat again. This taste awful so use a sponge not your tongue when wetting to seal.

Here are a couple from Rubber Rabbit:

18 T (that’s about a cup and a bit) vinegar-bring to a boil; add 1 pkg Jello in whatever flavor; stir til dissolved; let cool; keep in the refrigerator between uses. Brush on and let dry. that one is from Coffee Break Design.

I’m not too sure on this one; someone will correct me I’m sure: 1T each vinegar and white glue; drop or two of peppermint flavoring.

Those recipes were all kindly provided by members of the AML (Artistamps) list at Yahoo!Groups.

If you spot errors, missing links, or if you have yet another recipe, please let me know with the contact form, above, or leave your glue recipe as a comment.

Artistamps – Definition

aisegyptArtistamps can be described as fake postage. Some people call them faux postage, Cinderellas, postoids, or even real postage.

But at the post office, they may call them “fake.”

In other words, if you use artistamps in place of “real” postage, the post office is likely to return your mail, postage due.

Those of us who make artistamps often insist that they are real postage… just not from generally recognized countries.

That is, we often make up our own countries and/or issuing authorities. We’re not trying to pretend they’re legal postage in the US, or any other country from which we may be mailing these stamps. We create these stamps for fun, whimsy, art, and/or a statement.

tap-jeremy-bArtistamps can be printed or individually handmade. They may have perforated edges like traditional postage, or not. They may have a pretend ‘price’ designation on them, or not.

Artistamps are loosely related (or not) to the mailart movement, which in turn evolved from the Dada and perhaps Fluxus and/or Chaos movements.

Or not.

Mostly, artistamps are art, and they’re often fun, too. Some of us make up our issuing authorities.

We send our stamps–on cards, envelopes, and other items–often to people we don’t know. Those people may respond by sending us artistamps and/or mailart.

Or not. (I say that a lot, in connection with mailart.) It’s a boundariless field, and everyone participating probably has his/her own definitions for this art form.

Here’s one of my artistamps, from my imaginary country of Ballynafae. The picture actually shows the post office in Kilmallock, Co. Limerick, Ireland. The AML designation is from the Artistamp Mailing List, a Yahoo Group that sometimes organizes artistamp mailings and swaps.


Aisling’s Artistamps 2000 – 2005

I’ve been making artistamps since around 1978.

My first stamps were handmade, one by one, and sent with my zines of that era. I hand-carved a border that looked like a perforated stamp edge, and stamped it repeatedly to create the ‘frame’ of each stamp. Then, I put art in the middle.

At present, I don’t have copies of any of them. (I may find some as I go through old boxes of art supplies, etc., but that’s unlikely.)

But hey, if those mailings brought people joy, they served their purpose.

This webpage features many of my early digitally-created artistamps. Many of them are clickable, opening printable images… of varying quality. (When I saved my first digital files, I didn’t always understand things like resolution. So, some of them look and/or print better than others.)

airmail artistamp rhiannon artistamp 1 rhiannon stamp
create! artistamp ecp April Fool's artistamp electronic collaborative project artistamp
another ECP stamp - Sojourn in Egypt kilmallock post office stamp

Sunrise Series

This block of stamps features some of my sunrise paintings.

sunrise paintings

Tapestry Parade Series

This block of six stamps includes photos of Disney’s EPCOT parade, Tapestry. The puppeteers include Disney cast member Jeremy Pace (in the lower left stamp). The link opens a PDF version of the stamps.

Tapestry parade stamps

Disney World Tribute Series

This series features photos from Disney World. This set is not available in printable size.

disneyworld artistamps

Ballynafae Mardi Gras – 2001 Series

Also not available in printable size, this series includes photos from the popular tourist attraction, ‘South of the Border’.

Mardi Gras stamps - Ballynafae

Kilmallock Ireland Series

Kilmallock is south of Limerick, Ireland, and it’s one of my favorite towns in Ireland. Many of my ancestors came from this area.

kilmallock artistamps